JHBK-606 Very Popular Dry Net Cleaning Agent

Product Detail

Dry Forming Wire Cleaning Agent( JHBK-606)

1.Brief Introduction
Dry Forming Wire Cleaning Agent JHBK-606 is a kind of polymer made from advanced surfactant,penetrating agent,emulsion,anstatic agent,auxiliary  detergents and etc.By using it,the stickies of dry forming Wire can be better penetrated and cleaned.It can be used during or after equipment operation.The permeability of dry forming Wire can be improved.The cleaning dry parts operation can prolong the working time of dry forming wire.The paper broken situation resulted from sticky dirt will be avoided greatly.

2.Main Spec:

Appearance:colorless to light yellow liquid

Solid content:25%±1%

PH:10-14

Viscosity(25?):=50mpa.s

 Solubility:easily soluble in cold water

Appearance	Colorless to Light yellow Liquid
Solid Content	25%
Ionic type	Nonionic
PH	10-14
Viscosity(25C)	<50mPa.S
Solubility	Easily Soluble In Cold Water

3.Dosage&Application tips:

3.1 Dosage: 0.1kg to 0.3 kg for each square meters of dryer screen.

3.2 To dilute it with water of 10 times to 50 times.To spray onto the dry forming Wire when the equipment is in crawling speed.After around 20 minutes operation, the dry forming wire should be cleaned thoroughly.It can also be cleaned continuously during the operation process.

4.Notes:

To avoid contact with eyes.If , please rinse out immediately.


5.Package,Storage&Shelf Life Time

The package can be 200 Liters or 1000 Liters drum. It should be stored in cold place.

The shelf life time is 12 months.

Our Team:

 

Packing and Shipping:

 

Our Service: